Loading... Please wait...


Our Newsletter

LED Illuminator Cables - 12 and 24 Volt - Robot Duty

  • LED Illuminator Cables
  • 12-volt, 2-pin LED Illuminator Cables
  • 24-volt, 3-pin LED Illuminator Cables
1.00 LBS
Stock to 2 weeks
Calculated at checkout

Product Description

LVS Robot Duty LED illuminator cables are designed to provide DC power to all 12 or 24 Volt LVS illuminators in ring, dome, bar, coaxial and flat configurations.  These illuminator connections use standard SMP connectors with cable lengths to 20 meters. 12-volt cables use 2-pin connectors with pin 1 positive and 24-volt cables use 3-pin connections with pin 1 positive and pin 3 negative - pin 2 is unused.

These cables are intended for continuous motion use as on a robot arm or in a cable track.  When installing these cablesm assure that the connection at the illuminator end does not move when the cable flexes.

These cables use the same connector and pinouts found on LVS illuminators as well as on illuminators of several other brands.  Please check with us before using these cables with other brands to verify compatibility.

Standard lengths are listed above.  We can supply any length from 0.5 to 20 meters on special order.  There are no tooling charges but the minimum order is five pieces.  When calcualting lengths, please check the length of the cable permanently attached to the illuminator.  This is usually 0.5 meters for LVS products.

These cables are rated for 10 Watts with 12 Volt illuminators and 20 Watts with 24 Volt illuminators.









Find Similar Products by Tag

Illuminato  LED  LVS  r Cables  

Find Similar Products by Category

Add to Wish List

Click the button below to add the LED Illuminator Cables - 12 and 24 Volt - Robot Duty to your wish list.

You Recently Viewed...