LVS Standard Duty LED illuminator cables are designed to provide DC power to all 12 or 24 Volt LVS illuminators in ring, dome, bar, coaxial and flat configurations. Illuminator connections use standard SMP connectors with cable lengths to 20 meters. 12-volt cables use 2-pin connectors with pin 1 positive and 24-volt cables use 3-pin connections with pin 1 positive and pin 3 negative - pin 2 is unused.
These cables are intended for static use only, not to be moved continuously as on a robot arm or in a cable track.
These cables use the same connector and pinouts found on LVS illuminators as well as on illuminators of several other brands. Please check with us before using these cables with other brands to verify compatibility.
Standard lengths are listed above. We can supply any length from 0.5 to 20 meters on special order. There are no tooling charges but the minimum order is five pieces. When calcualting lengths, please check the length of the cable permanently attached to the illuminator. This is usually 0.5 meters for LVS products.
These cables are rated for 10 Watts with 12 Volt illuminators and 20 Watts with 24 Volt illuminators.