LVS Robot Duty LED spotlight illuminator cables are designed to provide DC power to all constant current LVS illuminators in coaxial spot and projector spot configurations. These illuminator connections use standard SMP 3-pin connectors with cable lengths to 20 meters. Pin 2 is positive and pin 3 negative - pin 1 is unused.
These cables are intended for continuous motion use as on a robot arm or in a cable track. When installing these cablesm assure that the connection at the illuminator end does not move when the cable flexes.
These cables use the same connector and pinouts found on LVS illuminators as well as on illuminators of several other brands. Please check with us before using these cables with other brands to verify compatibility.
Standard lengths are listed above. We can supply any length from 0.5 to 20 meters on special order. There are no tooling charges but the minimum order is five pieces. When calcualting lengths, please check the length of the cable permanently attached to the illuminator. This is usually 0.5 meters for LVS products.
These cables are rated for 1 ampere in constant current usage.