LVS DN-series power controllers are designed to provide digital intensity control for all 12 or 24 Volt LVS illuminators in ring, dome, bar, coaxial and flat configurations. 256-level intensity control is accomplished using a 780-kHz PWM power driver controller by a special 32-bit CPU core embedded in the controller FPGA.
Brightness for each channel can be independently controlled by either a front-panel knob or a command sent throught he RS-232 port. Each channel can be turned on or off without affecting the brightness setting through ans RS-232 command or by a wired binary 5 to 24 volt signal through a rear-panel connector.
DN-series controllers are available in 4, 10 and 16-channel versions for either 12 or 24-volt illuminators. The 4-channel models have separate front-panel controls for each channel while the 10 and 16-channel models have an LCD display indicating channel selection and status.
Lighing power for all models is provided through standard 2 or 3 pin SMT connectors with cable lengths to 20 meters. Cables for fixed or moving (robot arm) installations are available. See cable listings here.
Power mains from 90-264 volts at 47-63 Hz are accommodated.
The DN series enlosires are aluminum. Operating ranges - Temperature: 0-30C, Humidity: 30-85%. Storage temperature: -10 to 60C