Loading... Please wait...


Our Newsletter

LVS PS Series 1 to 4-Channel Strobe Power Controllers for LED Illuminators

  • LVS PS2124 Strobe Controller
  • LVS 1-Channel Strobe Controller drawing
  • LVS 2-Channel Strobe Controller drawing
  • LVS 4-Channel Strobe Controller drawing
4.00 LBS
Stock to 2 weeks
Calculated at checkout

Product Description

LVS PS-series power controllers are designed to provide stroboscobic duration control for all 12 or 24 Volt LVS illuminators in ring, dome, bar, coaxial and flat configurations.  Duration can be controlled through front-panel adjustments, threough external triggering or through the rear-panel RS-232 connection. The settable range is from 10 to 990 microseconds from the front panel or from 10 to 999.9 microseconds in 0.1 microsecond increments from the RS-232 connection.  Maximum duty cycle is limited to 10% to protect the LED illuminators.

Illuminator connections use standard 2 or 3-pin SMP connectors with cable lengths to 20 meters. Cables for fixed or moving (robot arm) installations are available.  See cable listings here.

All models include threaded side holes to permit mounting on any surface using inexpensive optional brackets. 


Select the combination of channel count and voltage/power you require using the buttons above.



Find Similar Products by Tag

Find Similar Products by Category

Add to Wish List

Click the button below to add the LVS PS Series 1 to 4-Channel Strobe Power Controllers for LED Illuminators to your wish list.

You Recently Viewed...