Loading... Please wait...


Our Newsletter

PIXCI® e104x4 Base/Medium/Full CameraLink PCIe/104 x4 Gen2 Framegrabber

  • PIXCI e104x4 CameraLink Framegrabber
1.00 LBS
Calculated at checkout

Product Description

The PIXCI® e104x4 frame grabber provides four connectors to support various combinations of  Base, Medium, Full or 10-bit CameraLink cameras. 

The PIXCI e104x4 is available in three configurations:

PIXCI® e104x4-2F   2 Base/Medium/Full or 80-bit ports
PIXCI® e104x4-4B   4 Base ports
PIXCI® e104x4-F2B   1 Base/Medium/Full/80-bit and 2 Base ports


The PIXCI e104x4 with XCAP offers:

  • Line Scan or Area Scan
  • Camera Frame Rate Sequence Capture
  • Triggered Image Sequence Capture
  • Camera Integration & Async Reset Control
  • Images Stored in Motherboard Memory or RAID Array
  • Windows & Linux, 32 & 64–bit Compatible

Interface Features

  • Type 1 Bottom-Stacking PCIe/104 x4 Gen 2.0 interface.
  • 64-Bit Memory Addressing
  • 20 Gigabyte per Second Burst Transfer Rate
  • Compact: 4.55 inch x 3.775 inch size (11.56 cm x 9.59 cm)
  • Self-Stacking: Expands Without Backplanes or Card Cages
  • Rugged, Reliable Connectors
  • Four-Corner Mounting Holes: Resistant to Shock and Vibration
  • Industrial Temperature Range

The PIXCI e104x4 is a plug-n-play frame grabber requiring no hardware setup or adjustment. Load the software, install the board, connect the cameras, and begin to capture images. 

Versions of the PIXCI e104x4 are available preset for many specific camera models.  Please request information on these if you have a particular camera you plan to use.




Find Similar Products by Category

Add to Wish List

Click the button below to add the PIXCI® e104x4 Base/Medium/Full CameraLink PCIe/104 x4 Gen2 Framegrabber to your wish list.

You Recently Viewed...