Loading... Please wait...

Categories

Our Newsletter


PIXCI® EB1miniG CameraLink Framegrabber

  • PIXCI EB1miniG (SDR version)
Price:
$330.00
Brand:
Weight:
0.50 LBS
Availability:
1 week
Shipping:
Calculated at checkout


Product Description

The PIXCI EB1miniGS/M captures from a base configuration line scan or area scan CameraLink camera. It supports trigger input, strobe output, shutter control, bit-packing capability, 64 bit memory addressing, and video rate sequence capture.

The PIXCI® EB1miniG has the Camera Link connector on a separate circuit board and connects to the FPGA circuit board with two very flexible cables. This version requires less space on the panel for more mounting options in space constrained embedded systems with a full size mini card PCIe slot. It is available with an MDR or SDR Camera Link connector, and is shown here with an SDR. At the maximum Camera Link clock rate of 85 MHz, a maximum length of 7 meters can be used.

Dimensions

  • Full mini circuit board: 50.95 x 30.0 mm (2.006 x 1.181 inches)
  • Connector circuit board: 38.354 x 30.0 mm (1.51 x 1.181 inches)
  • Cable length between circuit boards shown: 30.48 cm (12 inches)

Specifications

  • Base Configuration Camera Link
  • 26-pin MDR or SDR connector
  • Line Scan or Area Scan Cameras
  • Supports more than 1000 different camera models
  • Camera frame rate sequence capture
  • Triggered image sequence capture
  • Camera Integration & Async Reset Control
  • LVTTL Trigger In and Strobe Out
  • 50.95 mm long by 30.00 mm wide (2.006 in. by 1.181 in.)

Interface

  • PCI Express Mini Card
  • 64-bit memory addressing
  • Burst transfer at 250 megabytes per second
  • 200 megabyte per second sustained data transfer

Software

The XCAP-Lite imaging program, provided at no charge with the PIXCI® EB1miniG, provides independent Capture & Adjust Dialogs for each of the two inputs. If the two video sources (cameras) use the same format, and if their video outputs are to be captured with the same settings, then one Capture & Adjust Dialog provides common control. Choose the XCAP-Ltd program for extra display features, extended sequence capture to up to 8 GB of memory, and convenient saving of captured sequences to the hard drive. Choose XCAP-Std for maximum capture, display, and save capabilities (including direct video-to-disk capture) combined with extensive processing, measurement, and analysis features.

 

 

Find Similar Products by Tag

Find Similar Products by Category

Add to Wish List

Click the button below to add the PIXCI® EB1miniG CameraLink Framegrabber to your wish list.

You Recently Viewed...