Loading... Please wait...


Our Newsletter

PIXCI® EB1miniH CameraLink Framegrabber

  • PIXCI EB1miniH
0.50 LBS
1 week
Calculated at checkout

Product Description

The PIXCI EB1miniH captures from a base configuration line scan or area scan CameraLink camera. It supports trigger input, strobe output, shutter control, bit-packing capability, 64 bit memory addressing, and video rate sequence capture.

The PIXCI® EB1miniH has an SDR Camera Link connector and FPGA on a separate circuit board for mounting to the side of a small chassis. Two very flexible cables connect to a half length Mini card for the PCI express connection. This allows for more mounting options in space constrained embedded systems that have half length mini PCIe slots or full length slots that have a half length mounting standoff. At the maximum Camera Link clock rate of 85 MHz, cables up to 10 meters long can be used.


  • FPGA circuit board: 66.04 x 30.0 mm (2.6 x 1.181 inches)
  • Half mini circuit board: 26.8 x 30.0 mm (1.055 x 1.181 inches)
  • Cable length between circuit boards shown: 30.48 mm (12 inchees)


  • Base Configuration Camera Link
  • 26-pin MDR or SDR connector
  • Line Scan or Area Scan Cameras
  • Supports more than 1000 different camera models
  • Camera frame rate sequence capture
  • Triggered image sequence capture
  • Camera Integration & Async Reset Control
  • LVTTL Trigger In and Strobe Out
  • 50.95 mm long by 30.00 mm wide (2.006 in. by 1.181 in.)


  • PCI Express Mini Card
  • 64-bit memory addressing
  • Burst transfer at 250 megabytes per second
  • 200 megabyte per second sustained data transfer


The XCAP-Lite imaging program, provided at no charge with the PIXCI® EB1miniH, provides independent Capture & Adjust Dialogs for each of the two inputs. If the two video sources (cameras) use the same format, and if their video outputs are to be captured with the same settings, then one Capture & Adjust Dialog provides common control. Choose the XCAP-Ltd program for extra display features, extended sequence capture to up to 8 GB of memory, and convenient saving of captured sequences to the hard drive. Choose XCAP-Std for maximum capture, display, and save capabilities (including direct video-to-disk capture) combined with extensive processing, measurement, and analysis features.



Find Similar Products by Tag

Find Similar Products by Category

Add to Wish List

Click the button below to add the PIXCI® EB1miniH CameraLink Framegrabber to your wish list.

You Recently Viewed...