Loading... Please wait...


Our Newsletter

PT Series 1 to 4-Channel Power Controllers for LED Spot Illuminators

  • LVS PT-Series Spot Light Controllers
  • LVS PT-0105 Spot Light Controller drawing
  • LVS PT-0205 Spot Light Controller drawing
  • LVS PT-0405 Spot Light Controller drawing
4.00 LBS
Stock to 2 weeks
Calculated at checkout

Product Description

LVS PT series power controllers are designed to provide digital intensity control for 1 to 4 channels of constant-current Volt LVS spot and projector spot illuminators.  Intensity can be controlled through front-panel coarse and fine adjustments, through 5-volt analog remote control or through the rear-panel RS-485/RS-232 connection (in the 2 and 4 channel units). The settable range is from 15 to 1000 milliamps from the front panel or from the serial connection. Power to any channel may be shut off using and ecternal control linewithout affecting the intensity setting.

The serial port may be set to RS-485 mode to allow daisy-chaning of multiple controllers or to RS-232 mode for simple control.

Illuminator connections use standard 3-pin SMP connectors with cable lengths to 20 meters. Cables for fixed or moving (robot arm) installations are available.  See cable listings here.


Select the channel count you require using the buttons above.



Find Similar Products by Tag

Find Similar Products by Category

Add to Wish List

Click the button below to add the PT Series 1 to 4-Channel Power Controllers for LED Spot Illuminators to your wish list.

You Recently Viewed...