Loading... Please wait...

Our Newsletter


Three-Channel Multispectral Camera - Bayer/NIR/NIR - Sony ICX285

  • Image 1
  • Image 2
  • Image 3
Price:
$19,100.00
SKU:
3813-1005-11-00
Weight:
2.00 LBS
Shipping:
Calculated at checkout
Quantity:


Product Description

Condor-1000 C3-PCH-285

The Condor-1000 CS is a three channel camera based on unique separation prism technology developed by Quest for all its prism based cameras. This technology allows the camera to provide complete images at full resolution and full frame rate for all three channels.

The Condor-1000 C3-PCH-285 uses three Sony ICX285 sensors, one with an RGB Bayer filter array and two monochrome.

Optical channel configuration:

Channel 1 RGB Bayer (400-690nm)
Channel 2 NIR1 (690-830nm)
Channel 3 NIR2 (830-1000nm)

ms-3-curve.jpg

The camera is available with the following interfaces

CameraLink: Condor-1000 C3-PCH-285-CL
GigaBit Ethernet: Condor-1000 C3-PCH-285-GE
Fiber Optic: Condor-1000 C3-PCH-285-FO

The Sony ICX285 CCD sensor is a diagonal 11mm (Type 2/3) interline CCD solid-state image sensor with a square pixel array. High sensitivity and low smear are achieved through the adoption of EXview HAD CCD technology. Progressive scan allows all pixels' signals to be output independently within approximately 1/15 second. Also, the adoption of high frame rate readout mode supports 60 frames per second. This chip features an electronic shutter with variable charge-storage time which makes it possible to realize full-frame still images without a mechanical shutter.

High resolution and high color reproductively are achieved through the use of R, G, B primary color mosaic filters.

All Condor-1000 cameras use dichroic coatings to split the light spectrum in several regions. Since the separation is optical, the channels do not influence each other (as pixel coatings like Bayer patterns would). When the sensors are applied to the beam splitter, a filter can be placed in front of each sensor, such as a narrow-band color filter or a polarization filter. The default interface to connect to a PC or other external equipment is Camera Link, since this is one of the few interfaces that can handle the data rate output by a parallel imaging system. When a lower frame rate is acceptable, GigE is available. For longer runs at full speed, the fiiber optic link is available.  Upon request all Condor-1000 cameras can be equipped with an image processing core to execute image processing tasks that you specify.

ms3-spec.jpg

The Condor-1000 cameras include a full-featured image acquisition, processing, analysis and display suite, Architector. 


Find Similar Products by Category


Add to Wish List

Click the button below to add the Three-Channel Multispectral Camera - Bayer/NIR/NIR - Sony ICX285 to your wish list.